How Annotations Work In Java ?

By Yashwant
Feb 16th, 2014

Annotations have been a very important part of Java and it’s been there from the time of J2SE 5.0. All of us might have seen annotations like @Override and @Deprecated in our application code at some place or other. In this article I will discuss what exactly annotations are, why they were introduced, how they work, how to write custom annotations (with example code), what could be valid scenarios for annotations and lastly Annotations and ADF. It’s going to be a long post, so get a mug of coffee and get ready to dive into world of annotations.

What are annotations?

One word to explain Annotation is Metadata. Metadata is data about data. So Annotations are metadata for code. For example look at following piece of code.

public String toString() {
return "This is String Representation of current object.";

I have overridden toString() method and used @Override annotation in above code. Even if I don’t put @Override, code works properly without any issue. So what’s the advantage and what does this annotation stand for? @Override tells the compiler that this method is an overridden method (metadata about method) and if any such method does not exist in parent class, than throw a compiler error (method does not override a method from its super class). Now if I would have made a typography mistake and used method name as toStrring() {double r} and if I wouldn’t have used @Override, my code would have compiled and executed successfully but outcome would be different from what I would have accepted. So now we understand what annotations are but still it’s good to read formal definitions

Annotation is special kind of Java construct used to decorate a class, method, field, parameter, variable, constructor, or package. It’s the vehicle chosen by JSR-175 to provide metadata.

How Annotations Work In Java ?

How Annotations Work In Java ?

Why Annotations were introduced?

Prior to annotation (and even after) xml were extensively used for metadata and somehow a particular set of Application Developers and Architects thought XML maintenance was getting troublesome. They wanted something which could be coupled closely with code instead of xml which is very loosely coupled (in some cases almost separate) from code. If you google “xml vs. annotations”, you will find a lot of interesting debates. Interesting point is XML configurations were introduced to separate configuration from code. Last two statements might create a doubt in your mind that these two are creating a cycle but both have their pros and cons. Let’s try to understand with an example.

Suppose, you want to set some application wide constants/parameters, in this scenario XML would be a better choice because this is not related with any specific piece of code. If you want to expose some method as a service, annotation would be a better choice as it needs to be tightly coupled with that method and developer of the method must be aware of this.

Another important factor is annotation defines a standard way of defining metadata in code. Prior to annotations also people used their own ways to define metadata. Some examples are – using marker interfaces, comments, transient keywords etc. Each developer decided his own way to decide metadata but annotation standardized things.

These days most frameworks use combination of both XML and Annotations to leverage positive aspects of both.

How Annotations Work and How to write Custom Annotations?

Before I start this explanation, I will suggest you to download this sample code for annotations ( and keep that open in any IDE of your choice, as it will help you to understand following explanation better.

Writing annotations is very simple. You can compare annotation definition to an interface definition. Let’s have a look at two examples – One is standard @Override annotation and second is a custom annotation @Todo

public @interface Override {

Something seems fishy about @Override, it’s not doing anything, how it checks if a method is defined in parent class. Well, don’t be surprised, I am not kidding you. Override annotation’s definition has that much code only. This is the most important part to understand and I am reiterating myself – Annotations are only metadata and they do not contain any business logic. Tough to digest but true. If annotations do not contain the logic than someone else must be doing something and that someone is consumer of this annotation metadata. Annotations only provide some information about the attribute (class/method/package/field) on which it is defined. Consumer is a piece of code which reads this information and then performs necessary logic.

When we are talking about standard annotations like @Override – JVM is the consumer and it works at bytecode level. Now that’s something application developers can’t control and can’t use for custom annotations. So we need to write consumers for our annotations by ourselves.

Let’s understand the key terms used for writing annotations one by one. In the above examples, you will see annotations are used on annotations.

J2SE 5.0 provides four annotations in the java.lang.annotation package that are used only when writing annotations:

@Documented – Whether to put the annotation in Javadocs

@Retention – When the annotation is needed

@Target? – Places the annotation can go

@Inherited – Whether subclasses get the annotation.

@Documented – A simple market annotations which tells whether to add Annotation in java doc or not.

@Retention – Defines for how long the annotation should be kept.

RetentionPolicy.SOURCE – Discard during the compile. These annotations don’t make any sense after the compile has completed, so they aren’t written to the bytecode. Examples @Override, @SuppressWarnings
RetentionPolicy.CLASS – Discard during class load. Useful when doing bytecode-level post-processing. Somewhat surprisingly, this is the default.
RetentionPolicy.RUNTIME – Do not discard. The annotation should be available for reflection at runtime. This is what we generally use for our custom annotations.

@Target – Where annotation can be placed. If you don’t specify this, annotation can be placed anywhere. Following are the valid values. One important point here is, it’s inclusive only which means if you want annotation on 7 attributes and just want to exclude only one attribute, you need to include all 7 while defining target.

ElementType.TYPE (class, interface, enum)
ElementType.FIELD (instance variable)
ElementType.ANNOTATION_TYPE (on another annotation)
ElementType.PACKAGE (remember

@Inherited – Controls whether annotation should affect subclass.

Now what goes inside an annotation definition? Annotations only support primitives, string and enumerations. All attributes of annotations are defined as methods and default values can also be provided

@interface Todo {
public enum Priority {LOW, MEDIUM, HIGH}
public enum Status {STARTED, NOT_STARTED}
String author() default "Yash";
Priority priority() default Priority.LOW;
Status status() default Status.NOT_STARTED;

Following is an example of how above annotation can be used

@Todo(priority = Todo.Priority.MEDIUM, author = "Yashwant", status = Todo.Status.STARTED)
public void incompleteMethod1() {
//Some business logic is written
//But it’s not complete yet

If we have only one attribute inside an annotation, it should be named “value” and can be used without attribute name while using it.

@interface Author{
String value();
public void someMethod() {

So far so good. We have defined our custom annotation and applied it to some business logic methods. Now it’s time to write a consumer. For that we will need to use Reflection. If you are familiar with Reflection code, you know reflection provide Class, Method and Field objects. All of these have a getAnnotation() method which returns the annotation object. We need to cast this object as our custom annotation (after checking with instanceOf()) and then we can call methods defined in our custom annotation. Let’s look at the sample code for which uses above annotation

Class businessLogicClass = BusinessLogic.class;
for(Method method : businessLogicClass.getMethods()) {
Todo todoAnnotation = (Todo)method.getAnnotation(Todo.class);
if(todoAnnotation != null) {
System.out.println(" Method Name : " + method.getName());
System.out.println(" Author : " +;
System.out.println(" Priority : " + todoAnnotation.priority());
System.out.println(" Status : " + todoAnnotation.status());

Use Cases for Annotations

Annotations are very powerful and Frameworks like spring and Hibernate use Annotations very extensively for logging and validations. Annotations can be used in places where marker interfaces are used. Marker interfaces are for the complete class but you can define annotation which could be used on individual methods for example whether a certain method is exposed as service method or not.

In latest servlet specification 3.0 a lot of new Annotations are introduced, especially related with servlet security.

HandlesTypes – This annotation is used to declare an array of application classes which are passed to a ServletContainerInitializer.

HttpConstraint – This annotation represents the security constraints that are applied to all requests with HTTP protocol method types that are not otherwise represented by a corresponding HttpMethodConstraint in a ServletSecurity annotation.

HttpMethodConstraint – Specific security constraints can be applied to different types of request, differentiated by the HTTP protocol method type by using this annotation inside the ServletSecurity annotation.

MultipartConfig – This annotation is used to indicate that the Servlet on which it is declared expects requests to made using the multipart/form-data MIME type.

ServletSecurity – Declare this annotation on a Servlet implementation class to enforce security constraints on HTTP protocol requests.

WebFilter – The annotation used to declare a Servlet Filter.

WebInitParam – The annotation used to declare an initialization parameter on a Servlet or Filter, within a WebFilter or WebServlet annotation.

WebListener -The annotation used to declare a listener for various types of event, in a given web application context.
WebServlet – This annotation is used to declare the configuration of an Servlet.

ADF (Application Development Framework) and Annotation

Now we are at the last part of our discussion. Application Development Framework, also known as ADF is developed by Oracle and used to build Oracle Fusion Application.  We have seen pros and cons, we know how to write custom annotations but where to use custom annotations in ADF? Does ADF provide any native Annotations? Interesting questions but there are certain limitations which prevent usage of annotation to a large scale in ADF. Frameworks which are mentioned earlier like spring and Hibernate, use AOP (Aspect oriented programming). In AOP, framework provides mechanism to inject code for preProcessing and postProcessing for any event. For example you have a hook to place code before and after a method execution, so you can write your consumer code in those places. ADF does not use AOP. If we have any valid use case for annotations, we might need to go via inheritance way.

Hope you enjoyed this article. Please drop in your comments. Do check other tutorials.

About the Author

- An avid reader and a big time comics fan. A software engineer by profession who loves writing code and make things work.

6 Responses to “How Annotations Work In Java ?”

  1. Amit says:

    Simply the best tutorial on Annotations. Thanks Yashwant.

  2. Eshwaran says:

    Very Nice and easy to get the concept in nutshell.

  3. Nagnath Mane says:

    Hi yashwant,

    thanks for your blog. it was very descriptive and I understand each and every point. I have one question, If I create my own annotation(which can be applied on method) then I have to write consumer logic. if I want to check the existing annotations consumer logic how can I check? like annotations @PathVariable ,@RequestMapping ? if I write the consumer logic for my custom annotation then how can I get the ClassName in which I have applied my annotation on class methods ?

  4. Sandeep says:

    Nice tutorial .. Keep posting

  5. Monir says:

    Special thanks for the details about the annotation even I have a little confusion.

    You write consumer class, but how this class will be called if I write my custom annotation?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

facebook comments: